Crafted from low-carbon 1010 steel (cold-drawn for precision), it weighs 20% less than traditional hot-rolled steel pipes of the same size, while maintaining sufficient strength to withstand the lateral forces of tight turns and sudden acceleration. Compliant with karting industry standards (e.g., AKC, WKA), it is available in a wide range of diameters (25mm–50mm) to suit both recreational and competitive go-karts, with stock sizes ready for same-day shipping.
Lightweight Strength: Made from 1010 low-carbon steel with 0.08–0.13% carbon content, offering tensile strength ≥ 365 MPa and yield strength ≥ 290 MPa. This material achieves a strength-to-weight ratio of 18 MPa/kg, outperforming aluminum pipes by 15% in structural rigidity while avoiding the brittleness of high-carbon alternatives.
Dimensional Precision: Outer diameter tolerance of ±0.3mm and wall thickness tolerance of ±0.1mm (measured via laser scanning every 5cm), ensuring compatibility with standard go-kart fittings (e.g., ANSI B16.22 flanges). The seamless construction eliminates weak points, preventing pipe failure during high-speed cornering (up to 80 km/h).
Corrosion Resistance: Surface treated with zinc phosphate coating (thickness 8–12μm, per ISO 9717) and clear passivation, withstanding 1500 hours of salt spray testing (ASTM B117) without rust. This protects against moisture and dirt accumulation on track surfaces, reducing maintenance frequency.
Processing Versatility: Easily bent (minimum bend radius 2x OD for cold bending) and welded (compatible with MIG and spot welding), enabling custom frame modifications for competitive karts. The pipe’s smooth surface (Ra ≤ 1.6μm) ensures consistent paint adhesion for team branding or aesthetic customization.
Recreational Go-Karts: Used in family entertainment centers (FECs) and rental fleets (e.g., indoor kart tracks) for its durability and low maintenance. The lightweight design reduces driver fatigue during extended sessions, while the corrosion resistance handles frequent cleaning.
Competitive Karting: Ideal for sprint and endurance racing karts (e.g., Rotax Max, X30 classes) where weight distribution directly impacts lap times. The pipe’s rigidity enhances chassis responsiveness, reducing body roll by 25% in tight turns (radius ≤ 5m).
Custom Kart Builds: Preferred by hobbyists for DIY go-kart projects (e.g., electric conversion karts, off-road buggies). Its wide size range and easy machinability allow integration with custom suspension and steering components.
Q: What is the maximum load capacity, and is it suitable for adult-sized karts?
A: For a 38mm OD pipe (2.0mm wall thickness), the maximum load capacity is 300 kg (static) and 150 kg (dynamic, during racing). It is fully suitable for adult-sized karts (driver + kart weight up to 250 kg) and meets WKA safety standards for competitive use.
Q: Can it be cut to custom lengths, and what is the tolerance for cut pieces?
A: Yes—custom cutting is available for lengths from 300mm to 3m with a tolerance of ±2mm. We also offer deburring services for cut ends to ensure safe handling and proper fitting installation, at no additional cost.
Q: How does it compare to aluminum pipes in terms of performance and cost?
A: It costs 30% less than aluminum pipes of the same size while offering better impact resistance (aluminum pipes dent at 50 J, vs. 80 J for our steel pipe). While aluminum is marginally lighter (5% difference), our steel pipe’s rigidity delivers superior handling—critical for competitive racing.
Crafted from low-carbon 1010 steel (cold-drawn for precision), it weighs 20% less than traditional hot-rolled steel pipes of the same size, while maintaining sufficient strength to withstand the lateral forces of tight turns and sudden acceleration. Compliant with karting industry standards (e.g., AKC, WKA), it is available in a wide range of diameters (25mm–50mm) to suit both recreational and competitive go-karts, with stock sizes ready for same-day shipping.
Lightweight Strength: Made from 1010 low-carbon steel with 0.08–0.13% carbon content, offering tensile strength ≥ 365 MPa and yield strength ≥ 290 MPa. This material achieves a strength-to-weight ratio of 18 MPa/kg, outperforming aluminum pipes by 15% in structural rigidity while avoiding the brittleness of high-carbon alternatives.
Dimensional Precision: Outer diameter tolerance of ±0.3mm and wall thickness tolerance of ±0.1mm (measured via laser scanning every 5cm), ensuring compatibility with standard go-kart fittings (e.g., ANSI B16.22 flanges). The seamless construction eliminates weak points, preventing pipe failure during high-speed cornering (up to 80 km/h).
Corrosion Resistance: Surface treated with zinc phosphate coating (thickness 8–12μm, per ISO 9717) and clear passivation, withstanding 1500 hours of salt spray testing (ASTM B117) without rust. This protects against moisture and dirt accumulation on track surfaces, reducing maintenance frequency.
Processing Versatility: Easily bent (minimum bend radius 2x OD for cold bending) and welded (compatible with MIG and spot welding), enabling custom frame modifications for competitive karts. The pipe’s smooth surface (Ra ≤ 1.6μm) ensures consistent paint adhesion for team branding or aesthetic customization.
Recreational Go-Karts: Used in family entertainment centers (FECs) and rental fleets (e.g., indoor kart tracks) for its durability and low maintenance. The lightweight design reduces driver fatigue during extended sessions, while the corrosion resistance handles frequent cleaning.
Competitive Karting: Ideal for sprint and endurance racing karts (e.g., Rotax Max, X30 classes) where weight distribution directly impacts lap times. The pipe’s rigidity enhances chassis responsiveness, reducing body roll by 25% in tight turns (radius ≤ 5m).
Custom Kart Builds: Preferred by hobbyists for DIY go-kart projects (e.g., electric conversion karts, off-road buggies). Its wide size range and easy machinability allow integration with custom suspension and steering components.
Q: What is the maximum load capacity, and is it suitable for adult-sized karts?
A: For a 38mm OD pipe (2.0mm wall thickness), the maximum load capacity is 300 kg (static) and 150 kg (dynamic, during racing). It is fully suitable for adult-sized karts (driver + kart weight up to 250 kg) and meets WKA safety standards for competitive use.
Q: Can it be cut to custom lengths, and what is the tolerance for cut pieces?
A: Yes—custom cutting is available for lengths from 300mm to 3m with a tolerance of ±2mm. We also offer deburring services for cut ends to ensure safe handling and proper fitting installation, at no additional cost.
Q: How does it compare to aluminum pipes in terms of performance and cost?
A: It costs 30% less than aluminum pipes of the same size while offering better impact resistance (aluminum pipes dent at 50 J, vs. 80 J for our steel pipe). While aluminum is marginally lighter (5% difference), our steel pipe’s rigidity delivers superior handling—critical for competitive racing.
